Fox 36 Float Factory FIT4 2023 Tapered Fork

Welcome To The Coronation. The Undisputed All-mountain Champion Gets A New Crown.

For 2023 the Fox 36 receives an update in the form of a new crown with updated design and engineering for more steer tube overlap improving durability and maintaining stiffness while dropping 20 grams.

“Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat.

Lighter

New Crown

Lighter by 20 grams, while increasing steerer-tube overlap at the CSU, the new crown design improves durability while our engineering maintains stiffness and drops weight.

Smoother

Kabolt x Axle

Kabolt X, a lightweight bolt-on floating axle to shave grams and increase torsional stiffness via a sleeveless, single-sided pinch bolt design.

Lower Leg Bypass Channels

Increasing air volume within the lower legs reduces the amount of additional unintended pressure ramping. Lower leg bath oil also circulates to the upper reaches of the legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel.

Lower Leg Bleeders

Allows for atmospheric pressure equalization for better fork performance, allowing full travel to be achieved and increasing small bump sensitivity and responsiveness.

Stiffer

Lower Leg Arch

Our new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity-style riding.

More Tunable

FIT4

In its fourth generation, our patented FIT4 closed cartridge system provides three on-the-fly compression damping positions—Open, Medium, and Firm—to adapt to varying trail conditions.

Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.

Adjustments:

• Two on-the-fly compression damping positions: Open, Firm
• Additional low-speed compression (Open mode adjust): 22 clicks
• Low-speed rebound: 10 clicks

Float EVOL

Optimises small bump sensitivity by increasing negative air spring volume. Its linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression.

Specification

• Air Channels: Yes
• Bleeders: Yes
• Floating Axle: Yes
• Rotor Size: 180mm Direct Post Mount, Up To 230mm Compatible
• Mud Guard Mount: Optional Fox 36/38 Mud Guard With Sturdy 4-Point Direct-Mount Attachment
• Damper: FIT4
• Travel: 150mm & 160mm
• Wheel Size: 27.5" & 29"
• Axle: 15QR x 110mm Boost
• Steerer: 1.5 Tapered
• Upper Leg Finish: Genuine Kashima Coat